Copy of Street Guardian SGX2HW SGGCX2PRO Hardwire Kit - Add Parking Mode
Street Guardian SGX2HW Hardwire Kit. Install the SGX2HW to enable a special parking mode on the Street Guardian SGX2HWPRO Dash Camera System. With the SGX2HW Hardwire Kit the SGX2HWPRO parking mode includes build-in low-voltage cut-off so that the camera will turn off before draining the vehicle's battery.Select from five available fuse taps. See photo diagram to identify which one you need for your vehicle.
Please note that the SGX2HW is not compatible with the SG9663DC
Keep a Watch on Your Vehicle When Parked with the Street Guardian SGX2HW Hardwire Kit
Enables Parking Mode on the Street Guardian SGX2HWPRO Dash Camera System
Includes Selectable Low-Voltage Cut-Off Function and Timer to Adjust How Long the Parking Mode is Enabled For on the Camera
Parking Mode Feature Automatically Turns on When the Vehicle is Turned Off
Cable is 4m long in total, 3m from camera to the converter, 1m from the converter to end of the fuse taps
Time-lapse Footage Will Record While Parked, Until Either the Low-Voltage Cut-Off Voltage, is Reached/ Timer Limit Expires or the Vehicle is Turned Back On
2 Fuse taps included – 1 for permanent power, and one for accessory switched power.
Please note that the sizes may vary slightly between manufacturers, and the colors of your fuses may be varied depending on the Amp rating of the fuse you use. Our Hardwire Kits only use a 5Amp fuse, however the original fuse in your vehicle may be a different Amp rating. In this case, simply use the piggy back plug to replace the original fuse and plug the original fuse back into the piggy back plug in the appropriate slot, then add the 5Amp fuse for the Hardwire Kit to the remaining slot.
* DISCLAIMER* This information is provided as a reference guide only, and not intended to be an instruction manual, or a how to. We strongly recommend using a professional installer for the installation of the Hardwire Kit, to avoid any issues that might arise.